YAYINLAR

1. Übeyli, M. A study on the damage of potential first wall materials in a nuclear fusion reactor using plutonium bearing salt KERNTECHNIK  Volume : 76 Issue: 5  Pages: 341-346, 2011

2. Übeyli M, Acır A, Keleş O, et al. Effect of cutting parameters on cutting force and surface roughness in milling alumina reinforced Al-6Zn-2Mg-2Cu composites, POWDER METALLURGY  Volume: 54   Issue: 2   Pages: 172-176,  2011.

3. Demir T, Übeyli M. A micro-damage investigation on a low-alloy steel tested using a 7.62-mm AP projectile, MATERIALI IN TEHNOLOGIJE  Volume: 45   Issue: 2   Pages: 115-120, 2011.

4. Topçu O, Übeyli M, Acır A. Effect of the martensite volume fraction on the machining of a dual phase steel using a milling operation, MATERIALI IN TEHNOLOGIJE  Volume: 45 Issue: 2   Pages: 145-150, 2011.

5. Sarıkan B, Balcı E, Übeyli M, Camuşcu N. An investigation on the aging behavior of the functionally gradient material consisting of boron carbide and aluminum alloy, 19th Conference on Materials and Technology, 22-23 November 2011, Portoroz – SLOVENIA.

6. Ş.Ünal, T.Yılmaz, E.Cihan, O.Büyükalaca, Otobüsler İçin Ejektörlü Klima Sistemi, ULIBTK’13 19. Ulusal Isı Bilimi ve Tekniği Kongresi, ss.872-878, Samsun, 9-12 Eylül 2013.

7. Ş.Ünal, T.Yılmaz, E.Cihan, O.Büyükalaca, Ejektörlü Klima Sisteminde Soğutma Etkinliğinin Kütlesel Debi Oranı İle Değişimi, Çukurova  8. Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 28(1), ss.37-52, 2013.

8. Ş.Ünal, Experimental determination of instantaneous cooling capacity of the bus air conditioning system, and comparison of analytical results, Energy Education Science and Technology Part A: Energy Science and Research, (SI-1): 711-718, 2012.

9. O.Büyükalaca, T.Yılmaz, Ş.Ünal, E.Cihan, E.Hürdoğan, Bir Otobüsün Soğutma Yükünün Analitik ve Deneysel Olarak Karşılaştırılması, ULIBTK’11 18. Ulusal Isı Bilimi ve Tekniği Kongresi, ss.579-584, Zonguldak, 07-10 Eylül 2011.

10. O.Büyükalaca, T.Yılmaz, Ş.Ünal, E.Cihan, E.Hürdoğan, Işınım Zaman Serisi (RTS) Yöntemi İle Bir Otobüsün Soğutma Yükünün Hesaplanması, 6th International Advanced Technologies Symposium (IATS’11), ss.227-230, Elazığ, 16-18 May 2011.

11. Turan E., Uslan Ġ., Übeyli M. Investigation on the rheological behavior of Al-Fe-V-Si/Alumina composite powders, Kovove Materialy Metallic Materials, 50, 51-58, 2012.

12. Sarıkan B., Balcı E., Übeyli M., et al., Investigation on the aging behviour of the functionally gradient material consisting of boron carbide and and aluminum alloy, Materiali in Tehnologije 46, 393-397, 2012. 

13. Balcı E., Sarıkan B., Übeyli M., et al., On the ballistic performance of the AA7075 based functionally graded material with boron carbide reinforcement, Kovove Materialy Metallic  Materials, 51, 257-262, 2013. 

14. Übeyli M., Balcı E., Sarıkan B., et al., The ballistic performance of SiC-AA7075 functionally graded composite produced by powder metallurgy, Materials & Design 56, 31-36, 2014.

15. Sarıkan B, ÖztaĢ M.K, Balcı E, Übeyli M, CamuĢcu N, KeleĢ Ö. Effect of artificial aging on the hardness of a functionally gradient material consisting of SiC and Aluminum 7075 
alloy, 6th International Powder Metallurgy Conference, 5-9 October, 2011, Ankara TURKEY.

16. Übeyli M, Balcı E, Sarıkan B, CamuĢcu N, Yıldırım R.O. A comparison on the impact resistance of Alumina/AA 7075 laminated composite and Alumina-AA 7075 graded material, 4th International & 25th All India Manufacturing Technology, Design and Research Conference, December 14-16, 2012 Kolkata-INDIA.

17. Balcı E, Sarıkan B, Übeyli M, CamuĢçu N. Impact behavior of the multilayered B4C/AA7075 functionally graded materials against armor piercing projectile, XVII. International Conference on Mechanics of Composite Materials, May 28 – June 01, 2012, Riga-Latvia. 

18. Übeyli M., Balcı E., Sarıkan B., et al., Production and Characterization of a Functionally Graded Material Reinforced with Alumina, 18th International Conference on Mechanika April 04-05, 2012, Kaunas Lithuania.

19. Özer E, Übeyli M. A study on the impact resistance of laminated composites containing silicon carbide and normalized steel layers, XVIII International Conference on Mechanics of Composite Materials (MCM-2014), 02-06 June, 2014, Riga-LATVIA.

20. Özer E, Übeyli M. On the Impact Failure Mechanisms in an Armor Material Consisting of Silicon Carbide and Tempered Steel Layers, 22nd International Conference on Materials  and Technology, 20-22 October 2014, Portoroz SLOVENIA.

21. Davetli Konuşmacı: Gürel B, Übeyli M. Tempering effect on the ballistic property of a high strength low alloy steel with various martensite fractions, VIth International Metallurgical  Congress, 29.05.2014 – 01.06.2014, Ohrid-MACEDONIA.

22.  Ertuğrul  CİHAN, Organik Rankine çevrimi ile çalışan atık ısı kaynaklı bir soğutma sisteminin performansının araştırılması, Isı Bilimi ve Tekniği Dergisi, 34, 1, 101-109, 2014.

23.  Barış KAVASOĞULLARI , Ertuğrul CİHAN , Organik Rankine Çevrimi ile Çalışan Buhar Sıkıştırmalı Soğutma Çevriminin Termodinamik Analizi, 2. Ulusal İklimlendirme Soğutma Eğitimi Sempozyumu ve Sergisi, 23-25 Ekim 2014 Balıkesir.